🏭 Custom wire harness manufacturer · Tai'an, China ✉ [email protected]  |  💬 WhatsApp +86 186 5381 8936

Products

Custom Wire Harnesses

Custom-made wire harnesses for consumer electronics, electrical products and other applications. Every assembly is built from your drawing, part number, sample or specification.

What we build by application

Pick the application closest to yours

Each application below is supported by custom wire harness and connector assembly production. If you don't see your product here, send us your drawing — we can quote it.

Reference sample only — illustrative image; 2-pin harness with a black plug and a small white socket. Actual products vary per your specification.

Shaver & Personal Care — Application example

One example of wiring assemblies we build for shaver and personal-care products. Length, gauge, terminal and connector are set per your specification — contact us to confirm fit for your product.

Request a quote →

Reference sample only — illustrative image; D-sub metal-shell connector with a 2-wire red/black pigtail. Actual products vary per your specification.

Radios & Compact Electronics — Application example

One example of wiring assemblies we build for radios, two-way radios and compact electronic devices. Length, gauge, terminal and connector are set per your specification — contact us to confirm fit for your product.

Request a quote →

Reference sample only — illustrative image; 2-wire harness with one black connector and one white plug. Actual products vary per your specification.

Speaker & Audio — Application example

One example of wiring assemblies we build for speaker and audio products. Length, gauge, terminal and connector are set per your specification — contact us to confirm fit for your product.

Request a quote →

Reference sample only — illustrative image; black D-shell panel-mount connector with flange holes and two pigtail wires. Actual products vary per your specification.

Electric Toys — Application example

One example of wiring assemblies we build for electric toys and battery-powered products. Length, gauge, terminal and connector are set per your specification — contact us to confirm fit for your product.

Request a quote →

Sample A: black cylindrical threaded housing with red and black pigtail leads, sample 1 of 2 for the LED and Lighting Wiring category

LED & Lighting — Sample A (application example)

One example of wiring assemblies we build for LED and lighting products. Length, gauge, terminal and connector are set per your specification — contact us to confirm fit for your product.

View Sample B (LED indicator with cable) →  |  Request a quote →

Reference sample only — illustrative image; black panel-mount threaded housing with a small 2-pin plug, joined by a red/black 2-wire pigtail. Actual products vary per your specification.

E-bike & Light Mobility — Application example

One example of wiring assemblies we build for e-bike and light mobility products. Length, gauge, terminal and connector are set per your specification — contact us to confirm fit for your product.

Request a quote →

Typical Customized Products

Real product samples showing our customized capabilities

Every product below is built from a real customer drawing, sample or specification. The connectors, terminals, wire lengths and wire gauges are customized per your requirement — no off-the-shelf SKUs. Application is not specified here; please contact us to confirm fit for your product.

Sample 1 of 14: 2-wire pigtail with black connector housing

Sample 01 — Customized Product Sample

Two wires (red and black) with a black connector housing on one end. Connector type, terminal type, wire gauge and length are set per your specification.

Sample 2 of 14: 2-wire pigtail with one connector housing and bare leads

Sample 02 — Customized Product Sample

Two wires (red and black) with a black plastic connector on one end and bare leads on the other. Built per your drawing, part number or sample.

Sample 3 of 14: 2-wire pigtail with black connector housing with flange mounting holes

Sample 03 — Customized Product Sample

Two wires (red and black) with a black plastic connector housing fitted with flange mounting holes. Length, gauge, terminal and connector set per your specification.

Sample 4 of 14: D-sub style harness with 2-wire pigtail

Sample 04 — Customized Product Sample

D-sub style metal-shell connector with a 2-wire red/black pigtail. Shell, pin count and pin-out are customized per your specification.

Sample 5 of 14: harness with one black connector and one white plug

Sample 05 — Customized Product Sample

2-wire harness with one black connector on one end and one white plug on the other. Pin count, terminals and wire type are set per your requirement.

Sample 6 of 14: D-sub metal shell harness with two pigtail wires

Sample 06 — Customized Product Sample

D-sub metal-shell connector with two pigtail wires. Shell, pin configuration and wire spec customized per your drawing.

Sample 7 of 14: D-shell panel-mount connector with two pigtail wires

Sample 07 — Customized Product Sample

Black D-shell panel-mount connector with flange holes and two pigtail wires. Shell type and wire spec per your specification.

Sample 8 of 14: 2-pin harness with black plug and small white socket

Sample 08 — Customized Product Sample

2-pin harness with a black plug on one end and a small white socket on the other. Built per your specification.

Sample 9 of 14: D-pin shell to 2-pin plug harness

Sample 09 — Customized Product Sample

D-pin shell connector on one end and a small 2-pin white plug on the other, joined by a red/black 2-wire pigtail. Customized per your drawing.

Sample 10 of 14: panel-mount threaded socket plus small 2-pin plug harness

Sample 10 — Customized Product Sample

Black panel-mount threaded socket on one end, small 2-pin plug on the other, joined by a red/black 2-wire pigtail. Customized per your spec.

Sample 11 of 14: panel-mount threaded housing plus 2-pin plug harness

Sample 11 — Customized Product Sample

Black panel-mount threaded housing on one end and a small 2-pin white plug on the other, joined by a red/black 2-wire pigtail. Customized per your spec.

Sample 12 of 14: USB Type-C panel-mount socket plus small 2-pin plug harness

Sample 12 — Customized Product Sample

Black panel-mount housing with a USB Type-C socket on one end and a small 2-pin plug on the other. Customized per your drawing.

Sample 13 of 14: small LED indicator module with red and black pigtail leads, shown illuminated during production testing

Sample 13 — Customized Product Sample

Small LED indicator module with red and black pigtail leads. The photo was taken while the LED was lit during production testing, showing actual emission. Wire length, gauge, connector type and pin configuration are customized per your specification.

Sample 14 of 14: black cylindrical threaded housing with pigtail leads, form category pending human classification

Sample 14 — Form category pending

Black cylindrical threaded housing with red/black pigtail leads. Form category pending human classification — please contact us to identify this sample before quoting.

Send Your Drawing for a Quote →

Built to your specification

Five things we customize on every order

Every parameter below is set per your drawing or sample. If you don't have a drawing, send a photo or part number and we'll cross-reference it.

Length

Customer-specified wire length, cut and terminated to your dimension.

Wire Gauge

Choose the required wire diameter / gauge — copper conductor selected to suit your current and flex needs.

Terminal

With terminal at one end, terminals at both ends, or no terminal / bare wire — your call.

Connector

Customer-specified connector type, brand series and pin configuration.

Assembly

Single wires, terminal wires, connector assemblies or complete wire harnesses — built to your spec.

Wire material, conductor, insulation color, shielding, jacket type and labeling are also customized per requirement.

Send your requirement

What you can send to start a quote

Drawing

PDF, DXF, STEP / IGES, or a hand sketch with dimensions — anything that shows the wire, terminal and connector layout.

Part Number

An existing part number from any brand. We cross-reference and quote an equivalent or compatible solution.

Sample

Send a physical sample of your existing harness — we'll measure, document and quote to match or improve it.

Product Photo

A clear photo of your current harness, taken from a few angles. Enough to start a discussion.

Specification

Wire length, gauge, terminal type, connector type, color — written specification is enough to start a quote.

Existing Harness

If you already have a working harness and need a second source, send it for review and reverse-engineering.

Start Your Quote →

Don't see your exact application?

If your product needs a custom wire, send us your drawing or sample. We can quote most wire and connector assemblies.

Send Your Drawing →
Chat on WhatsApp